Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display Page 65 User Manual Download

Page: 65 / 149

Menus

You can power on or off a selected device or change the input source or volume of the device.

Choose display devices from the list of sets, and select the

Home

tab.

Home

Select an item and change the corresponding setting.

Power

: Power on a selected display.

Off

: Power off a selected dis

Input

Input Source : Change the input source.

Input sources available can vary depending on the Display Device Models.

The input source can be changed only for displays that are turned on.

Channel

: Change the channel.

The TV channel can be changed by using the up/down arrow keys.

The channel can be changed only when the input source is

Only registered channels can be selected.

Volume

The volume can be changed or the sound can be muted only for displays that are turned on.

Volume

The volume can be adjusted using the slider bar in the range of 0 to 100.

Adjust the volume of a selected display.

Input

Enable or disable

Mute

for a selected display.

Mute

will automatically be disabled if

Volume

is adjusted when

Mute

is on.

Alert

Fault Device

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands