Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display Page 140 User Manual Download

Page: 140 / 149

Power Off, Screen Saver, or Power Save Mode

• Turn the power off for 2 hours after 12 hours in use

• Set the Monitor to power off with the PC Display Properties Power Scheme.

• Use a Screen saver if possible - Screen saver in one color or a moving image

is recommended.

• The Image Retention Free function applied to the product is recommended.

Change the Color Information periodically

Note

Use Two different colors

Rotate the Color Information with 2 different colors every 30 minutes.

• Avoid using a combination of characters and background color with large dif-

ference in luminance.

Avoid using Grey colors, which can cause Image retention easily.

Avoid: Colors with big difference in luminance (Black & White, Grey)

Information

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands