Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display Page 39 User Manual Download

Page: 39 / 149

Connections

Connecting a Computer

There are several ways to connect the computer to the monitor. Choose

one from the following options.

Using the D-sub (Analog) connector on the video card.

• Connect the D-sub to the 15-pin,

[RGB/COMPONENT IN]

port on the

back of your LCD Display and the 15 pin D-sub Port on the computer.

Using the DVI (Digital) connector on the video card.

• Connect the DVI Cable to the

[DVI IN]

port on the back of your LCD

Display and the DVI port on the computer.

Using the DP (Digital) connector on the video card.

• Connect the

[DP IN]

port on the LCD Display to the DP port on the PC

using the DP cable.

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands