manualshive.com logo in svg

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Share
Download
Samsung 400UX - SyncMaster - 40

2.

External

Sound is only output from the 

external

 speakers, and the volume can only be controlled

for them as well.

Sound Reset

Reset the sound settings.

Setup

Available Modes

•

 

PC

 / 

DVI

 / 

DisplayPort

•

 

AV

•

 

Component

•

 

HDMI

•

 

MagicInfo

•

 

TV

 Note

• A TV tuner box (sold separately) must be connected to use the TV. (US Only)

• For an 400UX-3, 460UX-3 model, 

MagicInfo

 can only be enabled when a network box is

connected.

Language

You can choose one of 13 languages.

 Note

The language chosen affects only the language of the OSD. It has no effect on any software

running on the computer.

Time

Clock Set

, 

Sleep Timer

, 

Timer1

 / 

Timer2

 / 

Timer3

, and 

Holiday Management

 can be set.

Adjusting the LCD Display

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands