manualshive.com logo in svg

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Share
Download
Samsung 400UX - SyncMaster - 40

•

 

Component

•

 

HDMI

•

 

MagicInfo

 For an 400UX-3, 460UX-3 model,

MagicInfo

 can only be enabled when a network box is connected.

 Note

• The remote control can be used to select 

MagicInfo

. However, it is recommended to use

a separate USB keyboard to utilize 

MagicInfo

 fully.

• For 

MagicInfo

 in Device mode, moving external devices while booting may cause errors.

Set up external devices only if the LCD Display turns on.

• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the

program (MagicInfo) may stop. If you do unplug the cable, restart the system.

• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the

program (MagicInfo) may stop.

• To access other sources, press the SOURCE button in 

MagicInfo

.

• The preset password for the LCD Display is "000000".

• The server program's Power-On option works only if the LCD Display's power is com-

pletely shut off.

Please make sure not to use the Power-On option when the LCD Display is in the process

of shutting down since this may cause system errors on the LCD Display.

• When using 

MagicInfo

 with the MagicInfo Server Program: perform Network mode.

• When using 

MagicInfo

 with the device directly connected to LCD Display : execute Device

mode.

• Press ESC to directly go to the 

MagicInfo

 Window screen.

• To setup 

MagicInfo

 on a Windows screen, a keyboard and mouse are required.

• To setup 

MagicInfo

 on a Windows screen, refer to the MagicInfo Server Help.

It is highly recommended not to turn off the AC power during an operation.

• For pivoted LCD Displays, ticker transparency is not supported.

• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for

movies.

• For drive D:, 

EWF

 is not applied.

• To save Setup contents that have been changed when 

EWF

 is in the 

Enable

 state, you

must 

Commit

 them.

• By selecting 

Disable

, 

Enable

 or 

Commit

, the system is restarted.

MagicInfo

Adjusting the LCD Display

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands