Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display User Manual Download Page 72

Page: 72 / 171

The PIP Control feature is available only for the displays whose power status is ON and the PIP
function is set to ON.

Settings

Picture

1. Click Settings of the main icons and the Settings Control screen appears.

Basic information required to adjust the Picture is displayed in the main menu. Settings for the selected monitor will
be displayed if one of the connected monitors is selected, and the default settings will be displayed if all monitors

are selected by clicking All and Select. If a value is changed in this screen, the current mode will automatically
switch to custom mode.

1) Picture

- Available only for TV, AV, S-Video, Component, HDMI1, HDMI2, DTV.

2) Contrast

- Adjusts Contrast of the selected display.

3) Brightness

- Adjusts Brightness of the selected display.

4) Sharpness

- Adjusts Sharpness of the selected display.

5) Color

- Adjusts Color of the selected display.

6) Tint

- Adjusts Tint of the selected display.
- Available only for NTSC.

7) Color Tone

- Adjusts the Color Tone for the selected display.

8) Color Temp

- Adjusts the Color Temp for the selected display.

9) Brightness Sensor

- Adjusts the Brightness Sensor for the selected display.

10) Dynamic Contrast

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display












































































































































































Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands