Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display User Manual Download Page 15

Page: 15 / 171

Receives a signal from the Display port.

Connect a DP cable to

[DP IN]

on the product

and DP IN on another display.

AV/COMPONENT AUDIO IN [R-AUDIO-

Connect the

[AV/COMPONENT AUDIO IN

[R-AUDIO-L]]

port on the monitor to the audio

output port on the PC or on the external de-

vice using an audio cable.

AV IN

Connect the

[AV IN]

terminal of your monitor

to the video output terminal of the external

device using a VIDEO cable.

AUDIO OUT

Connect a headphone or an External speak-

er.

DC OUT

Make sure to use connecting

[DC OUT]

ter-

minal to the authorized TV-Tuner Box

[SBB_DTC/ZA].

Otherwise, this may result in damage

to the product.

HDMI IN 1

• Connect the

[HDMI IN 1]

terminal at the

back of your LCD Display to the HDMI

terminal of your digital output device us-

ing a HDMI cable.

• Up to HDMI 1.3 can be supported.

Note

• A normal external device (DVD player or

camcorder, etc.) or a TV tuner box can be

connected to the

[HDMI IN 1]

terminal.

• To use a TV tuner box, make sure to con-

nect it to the

[HDMI IN 1]

terminal.

HDMI IN 2 (MAGICINFO)

• Connect the

[HDMI IN 2 (MAGICINFO)]

terminal at the back of your LCD Display

Introduction

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display












































































































































































Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands