Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display User Manual Download Page 68

Page: 68 / 171

Time

1. Click Time of the main icons and the Time Control screen appears.

Info Grid shows some basic information necessary to Time Control.

1) Set clock

- Set the current time for the selected display (PC Time).
- To change the current time, first change the PC Time.

2) Timer

- Sets up Timer1, Timer2, Timer3 and Holiday Management.

3) Shows whether Timer is activated.

The Input source of MagicInfo works only on MagicInfo model.

The Input source of TV works only on TV model.

Time Control is available only for the displays for which the power status is ON.

Time

Setting up Timer and Holiday Management

1. 1. Setting up Timer1, Timer2 and Timer3

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display












































































































































































Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands