Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display User Manual Download Page 130

Page: 130 / 171

experience through any two-speaker playback system, including internal television speakers.

It is fully compatible with all multichannel formats.

Off

Sound Select

Enable the sound of either the primary or secondary display in

PIP

mode.

Note

Available when

PIP

is set to

Main

Sub

Speaker Select

When you use the product with it connecting to a Home Theater, turn the internal speakers

off so you can listen to sound from the Home Theater's (external) speakers.

Internal

Sound is outputted both from the

Internal

speaker and the

External

speakers, but the

volume control is only available from the

Internal

speaker.

External

When sound is only outputted from the

External

speakers, the volume control is also

only available from the

External

speakers.

Sound Reset

Reset the sound settings.

Adjusting the LCD Display

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display












































































































































































Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands