Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display User Manual Download Page 146

Page: 146 / 171

•

Off

•

MDC OSD

•

Off

•

Software Upgrade

Performs a software upgrade.

1. Connect the product to a computer via a digital signal such as

DVI

HDMI

. Click the

BMP image file converted from an SW code. The image below will appear on the screen

of the product.

2. While a BMP image onto which the software code has been converted is displayed on

the screen, select

Software Upgrade

Note

When there are two or more BMP images, they are displayed on the screen using a

slideshow.

• It is recommended that the playback interval between two BMP images in the slide-

show should be one second. The image extraction probability will decrease with other

playback intervals.

• A BMP image might not be extracted if it is covered by another image (for example,

the mouse pointer).

3. If a more recent version than the current software version is detected, you will be asked

whether to upgrade the current software. If you select <

Yes

>, the upgrade is performed.

4. When the software upgrade is completed, the product is turned off and on automatically.

Adjusting the LCD Display

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display












































































































































































Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320TSN - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands