Samsung 2 COLOR THERMAL PRINTER SRP-370, User Manual

Page: 38 / 45

74
GS B n
[Name]
[Format]
[Range]
[Default]
[Description]
Turns white/black reverse printing mode on / off.
ASCII GS B n
Hex 1D 42 n
Decimal 29 66 n
0 ≤ n ≤ 255
n=0
▪ Turns white/black reverse printing mode on or off.
- When the LSB of n is 0, white/black reverse mode is turned off.
- When the LSB of n is 1, white/black reverse mode is turned on.
GS H n
[Name]
[Format]
[Range]
[Default]
[Description]
Selects the printing position of HRI characters.
ASCII GS H n
Hex 1D 48 n
Decimal 29 72 n
0 ≤ n ≤ 3, 48 ≤ n ≤ 51
n=0
▪ Selects the printing position of HRI characters when printing a bar code.
- n selects the execution of printing and the printing position as follows :
n Printing position
0, 48 Not printed.
1, 49 Above the bar code.
2, 50 Below the bar code.
3, 51 Both above and below the bar code.
GS I n
[Name]
[Format]
[Range]
[Description]
Transmits printer ID.
ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 69, n=112
1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 69, (when TM-T88II compatible mode is
selected.)
▪ Transmits the printer ID specified.
- n specifies the types of the printer ID.
n Printer ID type ID
1, 49 Printer model ID Hexadecimal : 2EH Decimal : 46
2, 50 Type ID See table below.
3, 51 Firmware version ID Depends on firmware version.
- n specifies the printer information.
n Printer ID type ID
65 Firmware version Depends on firmware version
66 Manufacturer BIXOLON
67 Printer name SRP-370/372
75
GS L nL nH
[Name]
[Format]
[Range]
[Default]
[Description]
Set left margin.
ASCII GS L nL nH
Hex 1D 4C nL nH
Decimal 29 76 nL nH
0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
(nL + nH x 256)=0 (nL=0, nH=0)
▪ Sets the left margin specified by nL and nH.
- The left margin is [(nL + nH x 256) x (horizontal motion units)].
Printable area
Left margin Printing area width
GS P x y
[Name]
[Format]
[Range]
[Default]
[Description]
Set horizontal and vertical motion units.
ASCII GS P x y
Hex 1D 50 x y
Decimal 29 80 x y
0 ≤ x ≤ 255
0 ≤ y ≤ 255
For ANK/Multilingual model : x=180, y=360
For Japanese Kanji model : x=203, y=406
▪ Turns white/black reverse printing mode on or off.
- For SRP-370
When x=0, the default setting of the horizontal motion unit is used.
When 1 ≤ x ≤ 255, the horizontal motion unit is set to 25.4/x mm {(1/x)"}.
When y=0, the default setting of the vertical motion unit is used.
When 1 ≤ y ≤ 255, the vertical motion unit is set to 25.4/y mm {(1/y)"}.
- For SRP-372
When x=0, the default setting of the horizontal motion unit is used.
When 1 ≤ x ≤ 255, the horizontal motion unit is set to 25.4/x mm {(1/x)"}.
When y=0, the default setting of the vertical motion unit is used.
When 1 ≤ y ≤ 255, the vertical motion unit is set to 25.4/y mm {(1/y)"}.