background image

 

10 

 

 

5. Be sure to note the correct direction that the paper comes off the roll. 

 

 

 

 

        6. Pull out a small amount of paper, as shown. Then close the cover. 

 

                     

Feed

pape

r

Erro

r

Powe

r

 

 

 

    7. Tear off the paper as shown. 

 

 

 

Feed

paper

Error

Power

 

Notes : 

When closing the cover, press the center of printer cover firmly to prevent 

paper miss-loading

 

11

1-7. Adjustments and Settings 

 

 

1)It has 2 features ; Paper end and Black mark. For detecting Paper End, 

it must be positioned at    “a” Position in drawing and it is a factory default setting. 
For detecting Black mark printed on the paper, it must be moved to “b” position.   

2) Optical density (O.D) must be higher than 0.6 in density to secure a standard working 

condition. 

      Make sure if the density of paper black mark is lesser it might be a cause of normality. 
3) Table of O.D value (Reference)       

 
 

 

 

 

 

 

 
                    1.4                      0.9                      0.6                  0.3              0.2 

 

 

 

 

 

 

 

 

Summary of Contents for 2 COLOR THERMAL PRINTER SRP-370














































Reviews: