Samsung 2 COLOR THERMAL PRINTER SRP-370, User Manual

Page: 31 / 45

60
<Function 1>
GS ( E pL pH fn d1 d2 (fn=1)
[Format]
[Range]
[Description]
ASCII GS ( E pL pH fn d1 d2
Hex 1D 28 45 pL pH fn d1 d2
Decimal 29 40 69 pL pH fn d1 d2
(pL + pH x 256) = 3 (pL=3, pH=0)
fn=1
d1=73, d2=78
▪ Enter the user setting mode and notifies that the mode has changed.
Hexadecimal Decimal Number of Data
Header 37H 55 1 byte
Flag 20H 32 1 byte
NUL 00H 0 1 byte
▪ The following commands are enabled in the user setting mode.
<Function 2> through <Function 12> of GS ( E , GS I .
<Function 2> GS ( E pL pH fn d1 d2 d3 (fn=2)
[Format]
[Range]
[Description]
ASCII GS ( E pL pH fn d1 d2 d3
Hex 1D 28 45 pL pH fn d1 d2 d3
Decimal 29 40 69 pL pH fn d1 d2 d3
(pL + pH x 256) = 4 (pL=4, pH=0)
fn=2
d1=79, d2=85, d3=84
▪ Ends the user setting mode and performs a software reset. Therefore, the
printer clears the receive and print buffers, and resets all settings
(user-defined character, downloaded bit images, macros, and the print
mode) to the mode that was in effect at power on.
▪ This function code (fn=2) is enabled only in the user setting mode.
<Function 3> GS ( E pL pH fn [a1 b18...b11]...[ak bk8...bk1] (fn=3)
[Format]
[Range]
[Default]
ASCII GS ( E pL pH fn [a1 b18...b11]... [ak bk8...bk1]
Hex 1D 28 45 pL pH fn [a1 b18...b11]... [ak bk8...bk1]
Decimal 29 40 69 pL pH fn [a1 b18...b11]... [ak bk8...bk1]
(pL + pH x 256) = 10, 37
fn=3
a=1, 2, 8, 9
b=48, 49, 50
▪ Msw2-1, Msw2-2, and Msw-8-8 are set to On (b=49), and all other
switches are set to Off (b=48).
61
[Description] ▪ Change the memory switch specified by a to the values specified by b.
- When b=48, the applicable bit is turned to Off.
- When b=49, the applicable bit is turned to On.
- When b=50, the applicable bit is not changed.
▪ When a=1, the memory switch 1 is set as follows :
Bit Setting
value
Function
1~4 Reserved
48 Automatic line feed : Disabled 5
49 Automatic line feed : Enabled
6~8 Reserved
▪ When a=2, the memory switch 2 is set as follows :
Bit Setting value Function
1~2 Reserved.
48 Autocutter : Partial Cutting. 3
49 Autocutter : Full Cutting.
4~8 Code Page selection.
MSW2-8 MSW2-7 MSW2-6 MSW2-5 MSW2-4 Character Table
48 48 48 48 48 Page 0 437
48 48 48 48 49 Page 1 Katakana
48 48 48 49 48 Page 2 850
48 48 48 49 49 Page 3 860
48 48 49 48 48 Page 4 863
48 48 49 48 49 Page 5 865
48 48 49 49 48 Page 16 1252
48 48 49 49 49 Page 17 866
48 49 48 48 48 Page 18 852
48 49 48 48 49 Page 19 858
48 49 48 49 48 Reserved
48 49 48 49 49 Page
22 864
48 49 49 48 48 Page 23 Thai42
48 49 49 48 49 Page 24 1253
48 49 49 49 48
48 49 49 49 49
49 48 48 48 48
Reserved
49 48 48 48 49 Page 28 1251
49 48 48 49 48 Page 29 737
49 48 48 49 49 Reserved
49 48 49 48 48
Page 31 Thai16
49 48 49 48 49 Reserved
49 48 49 49 48 Page
33 1255
49 48 49 49 49
49 49 48 48 48
Reserved
49 49 48 48 49 Page 36 855
49 49 48 49 48 Page 37 857