Samsung 2 COLOR THERMAL PRINTER SRP-370, User Manual

Page: 35 / 45

68
<Function 65>
GS ( L pL pH m fn d1 d2 d3 (fn=65)
[Format]
[Range]
[Description]
ASCII GS ( L pL pH m fn d1 d2 d3
Hex 1D 28 4C pL pH m fn d1 d2 d3
Decimal 29 40 76 pL pH m fn d1 d2 d3
(pL + pH x 256) = 5 (pL=5, pH=0)
m=48
fn=65
d1=67, d2=76, d3=82
▪ Deletes all defined NV graphics data.
<Function 66> GS ( L pL pH m fn kc1 kc2 (fn=66)
[Format]
[Range]
[Description]
ASCII GS ( L pL pH m fn kc1 kc2
Hex 1D 28 4C pL pH m fn kc1 kc2
Decimal 29 40 76 pL pH m fn kc1 kc2
(pL + pH x 256) = 4 (pL=4, pH=0)
m=48
fn=66
32 ≤ kc1 ≤ 126
32 ≤ kc2 ≤ 126
▪ Deletes the NV graphics data defined by the key codes kc1 and kc2.
<Function 67> GS ( L pL pH m fn a kc1 kc2 b xL xH yL yH [c d1...dk]1...[c d1...dk]b (fn=67)
[Format]
[Range]
ASCII GS ( L pL pH m fn a kc1 kc2 b xL xH yL yH [c d1...dk]1...[c d1...dk]b
Hex 1D 28 4C pL pH m fn a kc1 kc2 b xL xH yL yH [c d1...dk]1...[c d1...dk]b
Decimal 29 40 76 pL pH m fn a kc1 kc2 b xL xH yL yH [c d1...dk]1...[c d1...dk]b
▪ GS ( L parameter
3 ≤ (pL + pH x 256) ≤ 65535 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 255)
▪ GS 8 L parameter
3 ≤ (p1 + p2 x 256 + p3 x 65535 + p4 x 16777216) ≤ 4294967295
( 0 ≤ p1 ≤ 255, 0 ≤ p2 ≤ 255, 0 ≤ p3 ≤ 255, 0 ≤ p4 ≤ 255 )
▪ Common parameter for GS 8 L / GS ( L
m=48
fn=67
a=48
32 ≤ kc1 ≤ 126
32 ≤ kc2 ≤ 126
b=1, 2
1 ≤ (xL + xH x 256) ≤ 8192
1 ≤ (yL + yH x 256) ≤ 2304
c=49 (when the monochrome paper is selected)
c=50 (when the two-color paper is selected)
0 ≤ d ≤ 255
k = ( int ( ( xL + xH x 256 ) + 7 ) / 8 ) x ( yL + yH x 256 )
69
[Description]
[Notes]
▪ The total capacity of the UV user memory is selectable as any one of [0,
64K, 128K, 192K, 256K, 320K, 384K] bytes with GS ( E . The default value
is 384KB.
▪ Defines the raster graphics data in the NV graphics area.
- b specifies the number of the color of the defined data.
- xL, xH specifies the defined data in the horizontal direction to (xL + xH
x 256) dots.
- xL, xH specifies the defined data in the vertical direction to (yL + yH x
256) dots.
- c specifies the color of the defined data.
c Defined data color
49 Color 1
50 Color 2
- Color 1 means black (high level of energy) in the specified tow-color
thermal paper.
- Color 2 means red (low level of energy) in the specified tow-color
thermal paper.
▪ If the color is specified with b and a single color also is specified with c,
the printer stops processing the command, and regards the defined data as
effective up to the time when the printer stops processing, then disregards
the remaining data after it.
▪ When this command is processed while NV bit image data is defined with
FS q , the printer deletes all NV bit image data, then defines data with this
command.
<Function 69> GS ( L pL pH m fn kc1 kc2 b x y (fn=69)
[Format]
[Range]
[Description]
ASCII GS ( L pL pH m fn kc1 kc2 x y
Hex 1D 28 4C pL pH m fn kc1 kc2 x y
Decimal 29 40 76 pL pH m fn kc1 kc2 x y
(pL + pH x 256) = 6 (pL=6, pH=0)
m=48, fn=69
32 ≤ kc1 ≤ 126
32 ≤ kc2 ≤ 126
x=1, 2
y=1, 2
▪ Prints the NV graphics data defined by the key codes kc1 and kc2. The
graphics data is enlarged by x and y in the horizontal and vertical
directions.