Samsung 2 COLOR THERMAL PRINTER SRP-370, User Manual

Page: 40 / 45

78
m Function
0 Executes the macro r times at the interval specified by t.
1
After waiting for the time specified by t, the PAPER OUT LED flashes to indicate
that the FEED button must be pressed. After the button is pressed, the macro is
executed once. This operation is then repeated r times.
GS a n
[Name]
[Format]
[Range]
[Default]
[Description]
Enable/Disable Automatic Status Back (ASB).
ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
0 ≤ n ≤ 255
n=0 when memory switch 1-3 is Off.
n=2 when memory switch 1-3 is On.
▪ Specifies the status items for ASB (Automatic Status Back).
Bit Off/On Hex Decimal Function
Off 00 0 Drawer kick-out connector pin 3 disable.
0
On 01 1 Drawer kick-out connector pin 3 enable.
Off 00 0 Online/Offline status disabled.
1
On 02 2 Online/Offline status enabled.
Off 00 0 Error status disabled.
2
On 04 4 Error status enabled.
Off 00 0 Paper roll sensor status disabled.
3
On 08 8 Paper roll sensor status enabled.
4 Off 00 0 Reserved.
5 Off 00 0 Reserved.
Off 00 0 Panel button status disabled.
6
On 40 64 Panel button status enabled.
7 Off 00 0 Reserved.
▪ The status to be transmitted is the four bytes that follows.
- First byte (printer information)
Bit Off/On Hex Decimal Function
0 Off 00 0 Fixed.
1 Off 00 0 Fixed.
Off 00 0 Drawer kick-out connector pin 3 is LOW.
2
On 04 4 Drawer kick-out connector pin 3 is HIGH.
Off 00 0 Online.
3
On 08 8 Offline.
4 Off 10 16 Fixed.
Off 00 0 Cover is closed.
5
On 20 32 Cover is opened.
Off 00 0 Paper is not being fed by using the paper FEED
button. 6
On 40 64 Paper is being fed by using the paper FEED button.
7 Off 00 0 Fixed.
79
[Notes]
[Reference]
▪ When the cover is open while the printing is stopped, the printer becomes offline.
- Second byte (printer information)
Bit Off/On Hex Decimal Function
Off 00 0 Not on online waiting status.
0
On 01 1 During online waiting status.
Off 00 0 Panel button OFF.
1
On 02 2 Panel button ON.
Off 00 0 No mechanical error.
2
On 04 4 Mechanical error has occurred.
Off 00 0 No Auto Cutter error.
3
On 08 8 Auto Cutter error occurred.
4 Off 00 0 Fixed.
Off 00 0 No unrecoverable error.
5
On 20 32 Unrecoverable error has occurred.
Off 00 0 No automatically recoverable error.
6
On 40 64 Automatically recoverable error has occurred.
7 Off 00 0 Fixed.
- Third byte (paper sensor information)
Bit Off/On Hex Decimal Function
Off 00 0 Paper roll near-end sensor : paper adequate.
0
On 01 1 Paper roll near-end sensor : paper near end.
Off 00 0 Paper roll near-end sensor : paper present.
1
On 02 2 Paper roll near-end sensor : paper not present.
Off 00 0 Paper roll end sensor : paper present.
2
On 04 4 Paper roll end sensor : paper near end.
Off 00 0 Paper roll end sensor : paper present.
3
On 08 8 Paper roll end sensor : paper not present.
4 Off 00 0 Fixed.
5 Off 00 0 Reserved.
6 Off 00 0 Reserved.
7 Off 00 0 Fixed.
▪ The paper roll end sensor is unstable when the cover is open.
- Fourth byte (paper sensor information)
Bit Off/On Hex Decimal Function
0 On 01 1 Reserved.
1 On 02 2 Reserved.
2 On 04 4 Reserved.
3 On 08 8 Reserved.
4 Off 00 0 Fixed.
5 Off 00 0 Reserved.
6 Off 00 0 Reserved.
7 Off 00 0 Fixed.
▪ When the memory switch Msw 8-7 is On, the printer transmits the ASB
data to the host whether the host can receive or not.
▪ When the memory switch Msw 8-7 is On, the printer transmits the ASB
data with the panel button status always being ignored.
APPENDIX J