SamplexPower PSR-1200-24, Owner'S Manual, Page: 74 / 100

74 | SAMLEX AMERICA INC.
SECTION 12 | Remote Parameter Monitoring & Setup Using
USB / RS-232 Serial Communication Protocol
12.6 COMMAND TABLE
Command
Format
Command
Example Meaning
Possible
Response
set/get
forcefan
on/off
set forcefan on Turn on the unit’s fan forcefully. OK
set forcefan off
Disable the function – “Turn on the unit’s fan forcefully”.
Note: the unit’s fan will be turned on/off according to the tempera-
ture or other condition automatically as necessary.
OK
get forcefan Return whether this function is enabled (ON). off
get fan get fan Return whether the unit’s fan is activated (Real-time Information). on
get vin get vin Return DC input voltage (Realtime Information). 24.1 V
get vout get vout Return the RMS of the output voltage (Real-time Information). 120.1 V
get iout get iout Return the RMS of the output current (Real-time Information). 4.2 A
get power get power Return the output real power (Realtime Information). 980.1 W
get freq get freq Return the output frequency (Realtime Information). 60.0 Hz
get gvout get gvout Return the RMS of the Grid AC voltage (Real-time Information). 120.1 V
get giout get giout Return the RMS of the Grid AC current (Real-time Information). 4.2 A
get gpower get gpower Return the Grid AC real power (Real-time Information). 980.1 W
get gfreq get gfreq Return the Grid AC frequency (Real-time Information). 60.0 Hz
set/get
cfgvout
{n.f}
get cfgvout Return the RMS of the output voltage setting. 120.0 V
set cfgvout 105.5 Set the RMS of the output voltage setting to 105.5 V OK
set/get
cfgfreq
{n.f}
get cfgfreq Return the output frequency setting. 60.0 Hz
set cfgfreq 55.2 Set the output frequency setting to 55.2 Hz OK
get/set
lcdcontrast {n}
get lcdcontrast Return the LCD contrast setting. 50 %
set lcdcontrast 50 Set the LCD contrast setting to 80 %. OK
get/set
lcdautooff {n}
get lcdautooff Return the LCD back light auto-off delay time. 60 seconds
set lcdautooff 120 Set the LCD back light auto-off delay time to 120 seconds. OK
set lcdautooff 0 Disable LCD back light auto-off function. OK
get
rs232speed /
usbvcomspeed
get rs232speed Return current RS-232 baudrate 4800 bps