H15
www.samon.nl - [email protected]
V1-2023-EN
6.3
Storage
•
Clean the machine properly.
NOTE!!!
When using a high pressure cleaner, do not spray directly on/in the bearings and electronic components.
•
Check the tyre pressure and inspect for damage. (4.5 Bar)
•
Check the drive belts for cracks and tears.
•
Slacken the drive belts.
•
Check all bearings and replace when clearance is excessive.
NOTE!!!
Replacement of the lower bearings of the topper shafts must be carried out by an authorised SAMON
dealer. The bearings require precise adjustment to minimise wear.
•
Check the bolts on the blades and the blades for wear and replace in time.
•
Lubricate the machine as a whole (see lubrication schedules in the Maintenance section).
•
Check the oil level in the gear drive and top up if necessary.
•
Check the cross connections and the turning parts of the PTO shaft for wear.
•
Lubricate the cross connections and the turning parts of the PTO shaft.
•
Check the protective cover of the PTO shaft for cracks.
•
Check the safety chains of the PTO shaft.
NOTE!!!
When the machine is not in use (also for shorter periods of time) and the PTO shaft is left
in the machine, attach the safety chain to the eye on the machine reserved for that
purpose to prevent damage to the protective cover and the cross connection.
•
Inspect the safety cords and locking clips for damage and cracks.
•
Check the hydraulic system for damage and leaks.
•
Check the electrical system for damage.
•
Store the machine dry.
