H6
www.samon.nl - [email protected]
V1-2023-EN
4.3
Connecting the SAMON Haulm Topper
•
Hitch the machine to the tractor.
•
Attach the mechanical pins and secure with the locking clips.
•
Check that the top rod is free.
•
Mount the PTO shaft (
1000 rpm PTO
).
o
SU15AO3B / SU18AO3B :
1000 rpm
.
o
SU20AO3B :
800 - 900 rpm
.
•
Secure the safety chains of the protective cover of the PTO shaft.
•
Install the supplied hydraulic hoses; the thicker hydraulic hose is the return hose.
NOTE!!!
Use with a SAMON Haulm Topper with automatic depth control of up to 30 L/min and always connect the
return hose to a pressure-free return!
•
Check all functions of the machine and the automatic depth control.
4.4
Inspection after ± 5 metres
•
Check that the machine is set to the correct depth.
•
Check that the top rod is free.
4.5
Inspection and maintenance after ± 5 ha.
•
Check the bolts on the blades and the blades for wear or damage.
Note: always replace both knives
from the same holder at once.
•
Check the drive belts for cracks and tears.
•
Check the tension of the drive belts and adjust if necessary (see 5.2).
WARNING!!!
Replace the knives on time. Vibration in the machine due to an imbalance can cause a lot of damage.
