Samlexpower Evolution EVO-1212F, Owner'S Manual

Page: 3 / 112

2 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 3
SECTION 1 | Safety Instructions & General Information
1.1 IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS. THIS MANUAL CONTAINS IMPORTANT INSTRUCTIONS FOR
MODELS: EVO-1212F, EVO-1212F-HW, EVO-1224F AND EVO-1224F-HW THAT SHALL BE
FOLLOWED DURING INSTALLATION & MAINTENANCE OF THE INVERTER/CHARGER.
THE FOLLOWING SYMBOLS WILL BE USED IN THIS MANUAL TO HIGHLIGHT SAFETY AND
IMPORTANT INFORMATION:
WARNING!
Indicates possibility of physical harm to the user in case of non-compliance.
MISE EN GARDE!
Il y a une possibilité de faire du mal physique à l'utilisateur si les consignes de sécurités
sont pas suivies
!
CAUTION!
Indicates possibility of damage to the equipment in case of non-compliance.
ATTENTION!
Il y a une risque de faire des dégâts à l'équipement si l'utilisateur ne suit pas les instruc-
tions
i
INFO
Indicates useful supplemental information.
Please read these instructions BEFORE installing or operating the unit to prevent per-
sonal injury or damage to the unit.
WARNING!
!
CAUTION!
1.
WARNING!
To reduce risk of explosion, do not install in machinery space or in area in
which ignition-protected equipment is required to be used.
2 CAUTION! (a) To prevent damage due to excessive vibration / shock, use on marine ves-
sels with lengths more than 65 ft. (19.8M). (b) This unit is NOT designed for weather-
deck installation. To reduce risk of electrical shock, do not expose to rain or spray.
3.1
CAUTION!
EVO
TM
Inverter/Charger with fully automatic charging circuit charges properly
rated 12V / 24V Lead Acid Batteries. When EVO
TM
Inverter/Charger is in Charge Mode,
Green LED marked "ON" will be blinking.
3.2 CAUTION! Option is available to use 12V / 24V nominal Lithium batteries. The user/
installer should ensure that charging voltages, currents and profiles are programmed ap-
propriately to meet all operating and safety requirements of the battery being used. When
the EVO
TM
Inverter/Charger is in Charge Mode, Green LED marked "ON" will be blinking.