Instruction Sheet
012-1
7395A
800-772-8700
www.pasco.com
SPARK LXi
2
Charging Station
PS-3602
A
Introduction
The PS-3602
A
SPARK LXi
2
Charging Station provides
an organized way to charge a class set of SPARK
LXi
2
dataloggers. Up to six SPARK LXi
2
dataloggers
can be charged simultaneously. The dataloggers are
held in place by a wire rack inside of a Gratnells®
case. The built-in power supply includes six USB
cables which connect to the charging port of the
SPARK LXi
2
dataloggers. The charging station is
powered by a single cord that connects to an electric
receptacle.
Operation
1.
Connect the power cord to an electric receptacle.
2.
Connect a USB cable to the USB
-C
port of a
SPARK LXi
2
datalogger.
3.
Insert the SPARK LXi
2
datalogger into the
wire
rack with the headphone jack facing down.
4. Repeat steps 2 and 3 for up to five additional
SPARK LXi
2
dataloggers.
Not
e
that
the
dataloggers are inserted in alternating
directions
into the wire rack (Figure 1).
Figure 1. Insert SPARK LXi
2
dataloggers in the wire rack
in alternating directions.
