manualshive.com logo in svg

Sames inocoat Inogun A, Instruction Manual

Share
Download
Sames inocoat Inogun A Instruction Manual Download Page 4

 

4

Member of Exel group

 

Inogun A

 

FCC, Standard and Robotic Versions

1. Health and Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   6

1.1. Configuration of the certified equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1.1.1. Applicable Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.2. Marking   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
1.3. Meaning of pictograms  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
1.4. Precautions for Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
1.5. Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
1.6. Regulatory tests to be carried out on the equipment according to standard 

 

EN 50177 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
1.7. Important recommendations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

1.7.1. Ventilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
1.7.2. O-ring seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
1.7.3. Safety devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
1.7.4. Mechanical collision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   14
1.7.5. Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

1.8. Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

2. Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   16
3. Characteristics  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   18

3.1. Dimensions (mm), straight version  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
3.2. Dimensions (mm), gravity center for robotic versions  . . . . . . . . . . . . . . . . . . . . . . . . . .  19

3.2.1. Robotic Single 60° Inogun A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
3.2.2. Robotic Twin Convergent 60° Inogun A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   20
3.2.3. Robotic Twin Parallel 60° Inogun A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21

3.3. Dimensions (mm), optional extended nozzles  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22
3.4. Dimensions (mm), 60° and 90° nozzle adapters option . . . . . . . . . . . . . . . . . . . . . . . . .  22
3.5. General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
3.6. Air compressed quality  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
3.7. Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23

4. Diagrams - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   24

4.1. Electrical connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24

5. Startup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   25

5.1. Tools   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25
5.2. Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26

5.2.1.  Inogun A FCC FCC version  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   26
5.2.2. Standard Inogun A version  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   27
5.2.3. Installation of the counter electrode for the standard Inogun A version. . . . . . . . . . .  28
5.2.4. Installation of an extended nozzle (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29
5.2.5. Installation of a 60° or 90° nozzle adapter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   30
5.2.6. Robotic versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   31

6. Maintenance  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   32

6.1. Summary table of maintenance operations   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
6.2. Preventive maintenance plan - PMP 7133  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33

Summary of Contents for inocoat Inogun A
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands