37
DRT7133
D - 2023/01
Member of Exel group
6.4.4. Procedure D1: Powder tube and penetrant testing version powder tube
• Start unscrewing the powder tube with a 14 mm pipe
wrench, then continue manually.
• Extract the powder tube from the projector.
• Clean the inside of the powder tube with compressed
air, possibly the outside.
• Check the condition of the O-rings (A) and powder
tube, replace if necessary.
• Before reassembling the powder tube, blow its housing in the direction of rear body towards the outside of the
projector.
• Insert the tube into the projector, it automatically positions itself and pushes it to the stop.
• Tighten manually and then continue tightening with the 14 mm pipe wrench.
A
Summary of Contents for inocoat Inogun A
Page 1: ...Instruction manual DRT7133 D 2023 01 Inogun A FCC Standard and Robotic Versions...
Page 78: ...78 Member of Exel group DRT7133 D 2023 01 10 Appendices 10 1 Preventive maintenance plan...
Page 82: ...79 DRT7133 D 2023 01 Member of Exel group 10 2 EU and UK declarations of conformity...
Page 87: ...Sames 13 Chemin de Malacher 38240 Meylan France 33 0 4 76 41 60 60...
