Operator’s manual
Rear disc mowers
KDT
- 6 -
1
2
3
4
5
6
7
8
9
10
11
11
3-point linkage frame (
1
) enables attachment of the mower to tractor’s 3-point linkage. Drive
from tractor’s rpm is transmitted through
intersecting axis gear
(
3
) on the cutterbar (
4
). On the
cutterbar, there are disco with two knives each. Apart from that, drive from tractor’s rpm through
Intersecting axis gear
(
3
) and PTO shaft (
10
) is transmitted to roller conditioner (
8
). Hydraulic
cylinder (
2
) is used to adjust the mower to working position. It is supplied from outer hydraulics of
the tractor. Main frame, on which the cutterbar is situated, is supported by the springs (
7
). Swath
guides (
5
) are mounted on the main frame.
Fig. 3c.
Parts of SaMASZ rear disc mower with tine conditioner
1 – 3-point linakge frame
2 – Hydraulic cylinder with support springs
3 – Intersecting axis gear
4 – Cutterbar
5 – Swath guides
6 – Safety guard
7 – Springs
8 – Roller conditioner
9 – Chain gear
10 – PTO shaft
11 – Support legs
3.3.
Standard equipment and spare parts
The mowers are sold with the following standard equipment:
warranty card,
operator’s manual with spare parts list,
cutting knives: additional set,
PTO shaft with overrunning clutch,
spray paint (150 ml).
Optional extra equipment:
warning plate with combined lights and reflectors,
warning triangle.
Tab. 3.
PTO shaft for rear disc mower
Model
Power Lenght
Torque
Symbol
Clutch
Producent
KM
ft. in
Nm
KDT 180
21
3'-3' 12''
270
7G2N086CE007096MA
Overrunning
right
BONDIOLI
& PAVESSI
KDT 220 ; KDT 260
KDT 300 ; KDT 340
KDT 341
KDT 220 S/SL/W
KDT 260 S/SL/W
35
2'12-4'22''
460
7G4N091CE007096MA