Operator’s manual
Rear disc mowers
KDT
- 17 -
N-149 N-187
N-29
N-05
N-16
N-32
N-01 ; N-02 ; N-03 ; N-04
N-06 ; N-07 ; N-23 ; N-48
N-49 ; N-50 ; N-117
N-167 ; N-168 ; N-204
N-205 ; N-206 ; N-224
N-109
N-14; N-15
N-63 ; N-162
N-40
N-09
N-213
N-201
N-40
Fig. 7b.
Placement points of warning signs on the mower with tine/roller conditioner
CAUTION:
Any spare part used for repair of the mower should have all warning decals
provided by the manufacturer.
5.
OPERATION
WARNING:
Before beginning to use this machine, do the following:
- Read manual, especially safety precautions in section 4.
- Make sure you are familiar with all controls and functions.
- Make sure all safety devices are in place and working. Fix or replace if not
working or damaged.
- Replace protective cover if damaged.
5.1.
Attaching the mower to the tractor
WARNING:
-
Only hitch and unhitch machine on a flat surface with compact dirt.
- Keep everyone away from area between mower and tractor.
- Be careful near link road zone of tractor's rear power lift. Contains sharp parts.
Mower’s frame is adjusted to be attached to the tractors with 3-point-linkage (
Fig. 8
). The mower
has been attached, adjust (on the flat ground) the mower’s position by means of top
S
and lower
W
links (
Fig. 8
). The cutterbar should lean towards the driving direction. Lower links
W
should be
connected to 3-point linkage frame pins
A
. Support chain
L
holds up mower’s linkage frame. Insert
and tighten the safety pins into the pin holes and make sure that they are well locked. Connect
hydraulic hose to tractor’s hydraulic connector.