Operator’s manual
Rear disc mowers
KDT
- 29 -
NOTICE:
Due to high discs rpm speed, change knife holders in sets of the same weight
– each holder has weight marked. Improperly changed knife holders will
damage disc bearings.
KDT 180
KDT 220
KDT 260
KDT 300
KDT 340
KDT 341
Fig. 24.
Rotation directions of disks
6.4.
Adjusting the cutting height
By means of upper link
S
(
Fig. 8
) adjust the cutting height.
Extending the link
S
increases the cutting height and shortening the link
reduces it. Cutting height is shown by the scale placed on the 3-point
linkage frame (
Fig. 25
), recommended height is 1.8"÷2.8".
Fig. 25.
Cutting height scale
Disc with the
forming drum
Disc without
the forming drum