Operator’s manual
Rear disc mowers
KDT
- 42 -
Calculating minimum weight of front ballast
M
P min.
– machine mounted at tractor's rear or
at rear and front:
Calculating minimum weight of rear ballast
M
T min.
– machine mounted at tractor's front:
Calculating real axis load at tractor's front axis
T
P rzecz
.
:
*
If machine is mounted on tractor's front 3-point linkage (M
P
) it is lighter than minimum required load at the front, so
increase the weight of this machine to the required minimum load
Calculating total weight of tractor-machine assembly
M
C
:
*
If machine is mounted on tractor's rear 3-point linkage (M
T
) it is lighter than minimum required load at the rear, so
increase the weight of this machine to the required minimum load
Calculating real axis load at tractor's rear axis
T
T rzecz.
:
Tyre load capacity – apply double the load indicated by the tyres' manufacturer.
ENTER THE ABOVE CALCULATION DATA AND TECHNICAL DATA PROVIDED BY
THE MANUFACTURER IN THE BELOW TABLE.
Real value from
calculations
Value to
technical
specification
Double value of
tyre capacity
load
Minimum weight of
front or rear ballast
M
Pmin.
or M
Tmin.
Total weight
M
C
≤
Front axis load
T
P rzecz
.
≤
≤
Rear axis load
T
T rzecz.
≤
≤
Minimum ballast must be reached by mounting the machine or additional weights provided on the tractor.
Values resulting from calculations should be lower than or even to values given in technical specification.