Operator’s manual
Rear disc mowers
KDT
- 36 -
7.2.
Intersecting axis gear
Everyday before starting work please check the oil level and, if needed, please refill after
having removed the vent
A
on the top of the gear (
Fig. 34
). The oil level can be checked through
the check opening
B
on the side of the gear. Please refill the oil until it is visible in the check
opening
B
. The oil capacity: about 0.26 US gal lqd.
Tab. 7.
Oil capacities
IMPORTANT:
The above instructions should be strictly followed. If the discs in
the cutterbar rotate loosely, do not worry about the high intersecting axis
gear temperature; after long working time it may reach even 100
o
C.
7.3.
Roller conditioner’s gearbox
Before you check the lubrication of the gearbox, please remove the safety guard. Everyday
before starting work please check the oil level and, if needed, please refill after having removed
the vent
A
on the top of the gearbox (
Fig. 35
) The oil level can be checked through the check
opening
B
on the side of the gear. Please refill the oil until it is visible in the check opening
B
.
The oil level: about 0.13 US gal lqd. Check oil level when the cutterbar is on the ground. Removing
the worked oil from the gearbox is done through the outlet
C
.
Tab. 8.
Oil capacities
Fig. 35.
Roller conditioner’s gearbox
lubrication points
Fig. 36.
Bearing lubrication
point with LT43 grease
Model
Oil
Capacity
[US gal lqd]
Oil type
Lubrication frequency
All types
0.26
Transol 680 ÷ 1000
(acc. to ISO 3448 oil
viscosity grade :
VG-680 – 1000 )
Once every 3 seasons
(if working intensively
more frequently)
Model
Oil capacity
[US gal lqd]
Oil type – for gearboxes
Lubrication frequency
All models
0.13
80W90
Once every 3 seasons
(if working intensively)
A
B
C
Lubrication
point
A
B
Fig. 34