Operator’s manual
Rear disc mowers
KDT
- 21 -
max. 30º
max. 30º
tighten the cord until the lock
Z
is released (
Fig. 10a
) and by means of hydraulic cylinder put
the mower into horizontal position,
with tractor’s lever lower the cutterbar to reach the horizontal position in a possibly slow way,
lower the mower until the support chain tightens. If the 3-point linkage frame is more than
1
′
4
″
above the ground, adjust the chain.
By means of link
S
(
Fig. 8
) adjust the cutting height. Extending the link
S
increases the cutting
height and shortening the link reduces it.
The proper distance between the end of cutterbar and tractor’s tyre
Y
should be about 0 to 4
″
for
KDT 180, KDT 220, KDT 260. For KDT 300
Y
should be between 11.8
″
and 1
′
4. For KDT 340,
KDT 341 between 1
′
8
″
and 1
′
12
″
.
Fig. 13.
Proper distance between the cutterbar and tyre
5.5.1.
Operating positions of the mower
Fig. 14.
Operating positions of the mower
Y
For KDT 180; KDT 220;
KDT 260
Y =
from 0 to 4
″
For KDT 300
Y
= from 11.8
″
to 1
′
4
″
For KDT 340;
KDT 341
Y
= from 1
′
8
″
to 1
′
12
″