Operator’s manual
Rear disc mowers
KDT
- 28 -
Fig. 22.
Adjustment of swath guides: 1- swath guide, 2 - adjustment screw, 3 - swath wheel
In order to set swath width, adjustment of swath guides (
1
) should be performed (
Fig. 23
)
(for: KDT 220 W, KDT 260 W):
loosen eye screw (
2
) of the swath guide,
set the swath guide (
1
) as needed,
tighten screw (
2
).
Fig. 23.
Adjustment of swath guides: 1- swath guide, 2 - adjustment screw
NOTICE:
Before you change the knife check disc turns (
Fig. 24
).
CAUTION:
Different mounting of the knives will block the mower. When mounting pay
particular attention to loose rotation of the knife on the knife holder pin.
1
2
1
1
2
1