Sam4s ER-350 II SERIES Page 54 Operator'S And Programming Manual Download | Manualshive

Page: 54 / 95

background image

48

•

Advanced Programming Instructions

ER-350II Electronic Cash Register v1.3

Programming Department Entry Limit or Price

Note: Open departments are automatically assigned a 7 digit entry limit. You
do not need to program this section for open departments, unless you wish to
set a different limit.

If you are programming a open department:

•

You can limit errors by setting the maximum amount that may be entered into a
department.

If you are programming a preset department:

•

You can set the preset price. The price you program here is the amount that is
automatically registered when the department key is pressed.

Programming a Department Entry Limit or Price

1.

Turn the control lock to the

PGM

position.

2.

If the department is preset, enter the preset price, up to seven digits (01 to 1234567).
(It is not necessary to enter proceeding zeros. For example enter $1.00 as 100.)

OR,

If the department is open, enter the entry limit you wish to set.

3.

Press the department key you wish to program, or press

DEPT SHIFT

and the

appropriate department if you are programming departments 9-16.

4.

Repeat from step 2 above for each department you wish to set.

5.

Press the

CASH/TEND

key to end programming.

«
...
52
53
54
55
56
...
»

Summary of Contents for ER-350 II SERIES
































































































Reviews:

No comments

Related manuals for ER-350 II SERIES

Brand: Garland Pages: 32

Brand: Pyle Pages: 10

Brand: Nautilus Hyosung Pages: 102

Brand: Nautilus Hyosung Pages: 101

Brand: Sam4s Pages: 2

Brand: Olivetti Pages: 61

FS-2600-1 SERIES

Brand: TEC Pages: 5

Brand: Sam4s Pages: 77

Brand: Hameg Pages: 28

Brand: WeP Pages: 36

BOUNTI BP20BOUNTI BP20T

Brand: WeP Pages: 59

People Counting L

Brand: TeraBee Pages: 19

Brand: POS-X Pages: 2

Brand: BEKA Pages: 40

Brand: Omron Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands