ER-350II Electronic Cash Register v1.3
Quick Setup
•
13
Programming Tax
Most sales taxes can be programmed by entering a tax percentage rate. However, in some cases you
may find that tax that is entered as a percentage does not follow exactly the tax chart that apply in
your area. If this is the case, you must enter your tax using tax table programming. This method will
match tax collection exactly to the break points of your tax table. See “Tax Table Programming” on
page 56.
Important Note: After you have entered your tax program, test for accuracy
by entering several transactions of different dollar amounts. Carefully check
to make sure the tax charged by the cash register matches the tax amounts on
the printed tax chart for your area. As a merchant, you are responsible for
accurate tax collection. If the cash register is not calculating tax accurately, or
if you cannot program your tax properly from the information in this manual,
contact your local SAM4s dealer for assistance.
Programming a Tax Rate Percentage
1.
Turn the control lock to the
PGM
position.
2.
Enter the rate, with a decimal. 0.000-99.999. It is not necessary to enter proceeding
zeros. For example, for 6%, enter 06.000 or 6.000.)
3.
Enter
00
.
4.
Enter:
1
to set tax rate 1
2
to set tax rate 2
3
to set tax rate 3
5.
Press the
TAX SHIFT
key.
6.
Press the
CASH/TEND
key to end programming.
7.
See tax rate program examples on page 14.
Tax Rate Programming Flowchart
.
TAX
SHIFT
0
0
Tax Rate
Tax #
(1-3)
CASH/
TEND
Please Note: After programming the tax rate, you must program your
department or departments taxable to calculate tax. See page 15 for
department programming steps.
