Sam4s ER-350 II SERIES Page 72 Operator'S And Programming Manual Download | Manualshive

Page: 72 / 95

background image

66

•

Advanced Programming Instructions

ER-350II Electronic Cash Register v1.3

PLU (Price Look Up) Programming

The

SAM4s ER-350II

offers 300 PLUs (Price Look Ups) as a standard feature. Like departments

PLUs (Price Look Ups) may be

open

or

preset

.

•

Preset PLUs are used to register preset items. The most significant difference between
a preset department and a preset PLU is the method of registration. While preset
departments are registered by simply pressing the department key, preset PLUs are
registered by entering the PLU number and pressing the PLU key.

There are many possible uses for preset PLUs. Since there are many more PLUs than
departments, you may use PLUs when you wish to accurately price and count a larger
group of items. Possible uses include: menu items in a restaurant or items (such as
cigarettes) that you wish to inventory.

•

Use open PLUs when you wish to enter different priced items into a larger number of
categories.

Programming PLU Status

There are two parts to PLU programming. PLU status is set here. Depending on whether you select
open or preset PLU status in this section, you can also program either the open PLU entry limit or
the preset PLU price. See “Programming PLU Entry Limit or Price” on page 69.

Use this section to program the following status options:

•

Set negative PLUs that subtract from the sale, rather than normal positive PLUs which
add to the sale.

•

Enforce the entry of a non-adding number before the PLU entry. See “Non Add
Number” on page 34 for operation sequences.

•

Disable the PLUs, so that entries are not allowed.

•

Choose Open or Preset PLUs.

•

Set single item PLUs which automatically total as a cash sale immediately after the
department entry. Single item departments are used to speed up one item sales.

•

Select a tax status to determine whether sales tax is automatically added.

«
...
70
71
72
73
74
...
»

Summary of Contents for ER-350 II SERIES
































































































Reviews:

No comments

Related manuals for ER-350 II SERIES

Vx-520 Series APACS 40

Brand: VeriFone Pages: 34

Brand: Fujitsu Pages: 5

Brand: Clean Logix Pages: 7

Brand: Sharp Pages: 2

Brand: Sharp Pages: 132

Brand: Steren Pages: 2

Brand: Steren Pages: 22

Brand: Nautilus Hyosung Pages: 26

Brand: Sam4s Pages: 176

Brand: Olivetti Pages: 70

Brand: Regent Control Systems Pages: 4

ECR 7700LD eco Plus SD

Brand: Olivetti Pages: 60

Brand: TSUJI ELECTRONICS Pages: 43

SYSMAC CS Series

Brand: Omron Pages: 1405

Brand: Axis Pages: 23

Brand: Axis Pages: 25

Brand: Oval Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands