Sirius 800 Series User Manual
Sirius 830
Module Locations 8.2
Iss 5 Rev 7
Page 92
© 2017 SAM
8.2.2 Sirius 830 Rear Panel Locations
Frames that are not fully populated with input or output rear panels have blanking plates fitted
in their place.
•
see section 8.1 for details on which rear panels that can be used with which front
module.
•
see section 8.2.4 for BNC and Fiber rear panel channel numbers and layout.
Cables connected to the router must be fitted with adequate vertical and horizontal strain
relief to avoid twisting of the rear panels causing damage to the router connectors and loss
of electrical/signal connection to the router.
Figure 55 Sirius 830 Rear Panel Locations
1369 External Multiviewer HD BNC
rear panel up to 3
or
1237 Monitor Output rear panel x 1
1234/1235 Input BNC rear x 12
or
1372 Input HD BNC + output DS-Link rear x 12
or
1236 Input Fiber rear x 12
or
1373 Input Fiber + output DS-Link rear x 12
or
1303 Input BNC rear x 12
or
1304 Input Fiber rear x 12
or
1354 Input Balanced AES rear x 12
or
1357 Input Unbalanced AES rear x 12
or
1299 Input Balanced AES rear x 12
1294 Output BNC rear x 12
or
1363 Output HD BNC rear x 12
or
1302 Output Fiber rear x 12
or
1364 Output DS Link rear x 12
or
1295 Output BNC rear x 12
or
1296 Output Fiber rear x 12
or
1353 Output Balanced AES rear x 12
or
1356 Output Unbalanced AES rear x 12
or
1298 Output Balanced AES rear x 12
Control Rear Panel (standard fit
non user replaceable part)
