Sirius 800 Series User Manual
5949 Video Embedding & AHP Output with Delay & Sync
Output Modules and Rear Panels 11.3
Iss 5 Rev 7
Page 190
© 2017 SAM
Frame/Line Sync
A video output signal can set to frame or line sync to a video reference signal (physical or
derived) as long as the video output signal and reference frame rates match. An offset can be
applied to the output signal relative to the frame or line sync to allow for delays later in the
system.
The offset for frame sync is set in frames, lines and pixels or in milliseconds. The offset for
line sync is set in pixels or in milliseconds. The offset settings can be preset for each standard
of video signal that might be expected to be routed to the output. Video offset is set in steps of
0.00001 ms up to a maximum of 14 frames for progressive video standards or 14 fields for
interlaced video standards.
The embedded audio can be sourced from before or after the frame sync block using the
Pre/Post Selector as required.
Each video standard has a tab for frame sync configuration and a tab for delay configuration.
The signal standard is auto detected and the channel uses the settings defined in the
appropriate Frame sync or Delay tab for that standard.
The example in Figure 123 shows
:
1080i50
- set to
Ref 1
so a 1080i50 signal will use frame sync settings in the
1080i FS
tab.
1080i59
- set to
Lock to Input
so a 1080i59 signal will use delay settings in the
1080i Delay
tab.
1080i60
- set to
Lock to Input
so a 1080i60 signal will use delay settings in the
1080i Delay
tab.
Audio Selection
Select the embedded audio from before or after the frame sync block
by clicking on the required option.
Sync Function
Select to sync to frame or to line by clicking on the required option.
Summary
tab (
Standard
&
Mode
) for each video input standard
Frame Sync
Indicator
Green when frame sync is enabled for the video standard.
Red when frame sync is not enabled for the video standard
Delay
Indicator
Green when video delay is enabled for the video standard.
Red when video delay is not enabled for the video standard
Figure 123 Example Workbench 1080i Frame Sync Settings Tab
Function
Function Description
Table 44
Frame Sync/Delay Summary Screen
