Sirius 800 Series User Manual
Workbench Catsii Control
Catsii Functionality 6.3
Iss 5 Rev 7
Page 82
© 2017 SAM
6.2.1 Door PC Catsii Control
The Catsii inputs and outputs can be identified using the door PC, Figure 45
6.3 Workbench Catsii Control
To apply a user-assigned color configuration through Workbench from a remote PC:
1.
In Workbench Configuration mode click on
Edit Controller Config
, select the
Generic
tab and click on the
Edit Controller
button. This opens the
Generic Editor
.
Nucleus (2450) Controllers
Navigate to:
Controller | Devices | Devices | Config2450 | ModuleConfigurations
| ModuleConfigurations[280]: TCatsiiControlModule
Nucleus2 Controllers
Navigate to:
Devices | Devices[1]: LocalRouterConfig | ModuleConfigurations |
ModuleConfigurations[280]: CatsiiControl
2.
Select a parameter and then select the color from the drop down list.
Figure 45 Door PC Catsii Control
