Sirius 800 Series User Manual
Sirius 830 Frame Overview
Product Overview 3.8
Iss 5 Rev 7
Page 36
© 2017 SAM
3.8.3 Rear Connectors
Figure 10 shows a fully populated Sirius 830 frame with BNC Inputs and Outputs. See
section 8.2 for rear panel input/output connector configuration details. Multiviewer crosspoint
cards and rear panels cannot be installed the same frame as a 1237 Monitoring module (for
details see section 13).
•
For details of the 1237 monitoring outputs see section 13.9.
•
For details of the Sirius 830 BNC and Fiber rear connectors see section 8.2.4.
Cables connected to the router must be fitted with adequate vertical and horizontal strain
relief to avoid twisting of the rear panels causing damage to the router connectors and loss
of electrical/signal connection to the router.
Figure 10 Sirius 830 frame with BNC Input/Output, Rear View
Figure 11 Sirius 830 1237 Monitoring Outputs
*
Multiviewer,
48Vdc Power Connectors
Inputs and Outputs,
*
1237
Monitoring
Module, see
Figure 11
Control Rear Panel,
Fans
Not used
*It is not possible to mix Multiviewers
and the 1237 Monitoring module in
the same frame (see section 13).
Ethernet
(Not Used)
4 3 2 1
Audio
Monitor
Video Monitor
4
3
2
1
