12
Product Support
203-349-2798
8.2. CONTROL PANEL
The front face of the
sam
Power Controller Module contains a control panel. The
LEDs on the control panel are divided into a fi eld for
Battery Indicator
and a fi eld for
Treatment Timer.
The operator is able to make selections by pressing the
Power Button
and the
Toggle Button.
Color of Battery Indicator LED*
Meaning
Red Only
Low Battery, Re-Charge required
Blinking Red
Re-Charge required
Amber
Power Controller is partially charged
Green
Power Controller fully charged
*These lights remain on for 4 seconds and subsequently turn off
Table 2. Battery Indicator LED Color Defi nitions
Treatment Time Indicator LED
Meaning
Blue
Treatment time remaining. Treatment
timer is set in one hour increments and
will count down in 30 minute increments
Amber
Treatment complete. This single “done”
light will activate only when a treatment
cycle has completed and will remain
illuminated for 8 hours, then turn off
Table 3. Treatment Time Indicator LED Color Defi nitions
8.3. APPLICATOR INDICATOR LED
LED Color
Meaning
Opaque (absence of light)
Applicator is not receiving power
Blue
Applicator is receiving power from the
Power Controller. Ultrasonic energy is
being generated at all times this light
is illuminated
Red (accompanied by vibration)
sam
Sensing Mode.
No Ultrasonic energy
is being generated from this applicator
while this light is illuminated
Table 4. Applicator LED Color Defi nitions
