Sam sam-12, Directions For Use Manual

Page: 18 / 35

19 ZetrOZ, Inc. Product Support 203-349-2798
11.4. APPLY ULTRASOUND
COUPLING BANDAGE TO
TREATMENT LOCATION
A. Hold the applicator so the bottom of the
bandage faces up. Remove the paper liner
from the back of the bandage, revealing
the bandage adhesive (Figure 10A).
i. The circular seal should peel off the
bottom of the gel cup along with the
paper bandage liner. If it does not peel
with the paper, be sure to peel away
the circular seal so the coupling media
is completely uncovered.
ii. Add more
sam
Coupling Media
as needed.
B. Turn the bandage over and adhere the
bandage to the desired treatment location
(Figure 10B).
i. The
sam
Coupling Media must be in
direct contact with the skin.
If using dual applicators, repeat these steps to
adhere the second bandage and applicator to the
second treatment site.
Note: When applying bandages, both sides of
the ultrasound coupling media should be
uncovered. One side should be in contact
with the skin. The other side should be in
contact with the face of the applicator.
fi gure 10A: Removing Paper Liner
Knee
fi gure 10B: Adhere Bandage to Site