![background image](http://html1.mh-extra.com/html/salvis/vitality-pro-sds-1-1-13/vitality-pro-sds-1-1-13_installation-and-operating-instruction_3686685060.webp)
en
60
8.
Setting and regenerating the water softener
8.1
Setting the water softener
D
The built-in water softener prevents scale build-up in the appliance and is set to level 4 in the
factory. Settings from 1 to 9 are available.
D
The water softener must be adjusted by the authorized customer service.
8.2
Regenerating the water softener
Please be aware that the regeneration process takes approximately 45 minutes. You should
therefore plan the regeneration process for times when you are not cooking.
Display
Cooking processes
Regeneration process
A few cooking pro-
cesses are still possi-
ble, depending on the
water hardness.
Carry out a regeneration process
−
on completion of the cooking process
−
as soon as possible,
−
but outside cooking hours.
No further cooking
processes are possi-
ble.
The regeneration process must be run immediately
on completion of the cooking process.
The cooking com-
partment is scaled
up.
Do not carry out any
further cooking pro-
cesses.
The softener may have been exhausted without this
being displayed by the appliance. Have the customer
service adjust the setting for the softener.
Starting the regeneration process
−
> if display shows ”rE”
D
if display shows ”rE”.
.
On completion of the cooking process, press the
programme key ”P”.
D
The indicator light in the key flashes.
.
Select programme number ”99” using the numeric
key.
.
Confirm programme number
−
press ”
↵
” key.
−
> if display shows ”rE rE”
D
The display shows the pro-
gramme number ”99” and
”rE rE”.
.
Confirm display
−
press ”
↵
” key.
.
Press the Start/Stop key.
D
Wait until you hear the buzzer and ”EE LL” appears in the display.
D
The appliance is ready for ”
filling the water softener
”.