![background image](http://html1.mh-extra.com/html/salvis/vitality-pro-sds-1-1-13/vitality-pro-sds-1-1-13_installation-and-operating-instruction_3686685063.webp)
en
63
9.1
Display of faults in the display panel
If faults should arise on the appliance, a signal is heard and a fault number is displayed.
.
Press the buzzer key
to switch off the buzzer.
Fault number
display
Cause
Remedy
Operation error
The core temperature sensor has not
been pushed into the food being coo-
ked. The control system has detected
a very rapid temperature rise on the
sensor.
Push the core temperature sensor into
the food being cooked and restart the
cooking process.
No cooking time or core temperature
has been entered for a cooking phase.
Enter a cooking time or core tempera-
ture
Technical faults
Cooking compartment sensor break
Turn off appliance and contact cu-
stomer service.
Cooking compartment short circuit
Turn off appliance and contact cu-
stomer service.
Water level time-out:
−
tap not open,
−
water supply too slow,
−
possibly excessive pressure drop
due to other consumers.
Open the water tap.
Connect the appliance to a separate
water supply, if necessary.
Increase water pressure.
Turn the appliance off and on.
Pressure switch time-out
−
the steam
generator does not reach pressure in
the specified time
Turn the appliance on and off. Contact
the customer service if the fault recurs.
Pressure relief switch
−
steam genera-
tor pressure too high
Turn the appliance on and off. Contact
the customer service if the fault recurs.
Core temperature sensor break
It is possible to continue working wi-
thout the core temperature function.
Contact customer service.
Core temperature sensor short circuit
It is possible to continue working wi-
thout the core temperature function.
Contact customer service.
Water conductivity too high after
regeneration. There is still salt residue
in the softener.
Repeat regeneration (programme 99)
without salt so that the salt remaining
can be flushed out.