![background image](http://html1.mh-extra.com/html/salvis/vitality-pro-sds-1-1-13/vitality-pro-sds-1-1-13_installation-and-operating-instruction_3686685042.webp)
en
42
3.
Commissioning
To operate the appliance correctly
−
the appliance must be correctly connected by an authorized customer service (page 65 sec-
tion 11.),
−
the built-in water softener must be set to the prevailing water hardness (page 60 section 8.).
.
Before commissioning for the first time, clean with a cleaning product that dissolves grease.
D
For cleaning, see page 58 section 7.
3.1
Getting ready for use
.
Open the water tap.
.
Switch on the mains switch for the appliance.
D
Switching on
.
Switch the appliance on
−
press the ”on/off” key
D
The indicator light and the display
flash while the appliance is heating up
D
The degree of exhaustion of the water softener is indicated as a percentage in the cooking
temperature display field
Exceptions: The display will not appear if no sof-
tener is built in or if the built-in softener has been deactivated via the control system.
D
If there is only a little capacity remaining, perform a regeneration in good time outside coo-
king hours, as a regeneration process takes at least 45 minutes and no cooking process is
possible during this time.
D
The appliance will be ready for operation after approximately 5 minutes if it had cooled down
completely.
D
Once the appliance is ready for operation, the indicator lights in the programmes
and
cooking temperature
keys flash