![background image](http://html1.mh-extra.com/html/salvis/evolino-pro/evolino-pro_operation-manual_3673220009.webp)
7
•
After selection of a cooking procedure and
OK
, you must set – time – or core temperature.
1
. Input time
2.
Input core temperature
3
. Input lines
•
Four-figure time display from 00:00 to 23:59.
1. Time:
Basic setting is 00:00 move arrow to get to
∞
= continuous operation.
Time setting is 23:59 move arrow
and you get again
∞
= continuous op.
Setting
is
∞
move arrow
and you get to 23:59
Setting
is
∞
move arrow
and you get to 00:00
2. Core Temperature: Core temperature range from 0°C to 99°C.
3. Use the direction arrows and to change between the input fields for time, core temperature and
the Climatic Cursor for Temperature/Humidity.
3.2 Manual
operation
– Input of one step
•
Input parameters, “temperature/humidity“ and “time“ or “core temperature“ and
start the Combi-steamer
LED START is lit.
•
If desired, you can activate the preheating by pressing the key PreHeat see Sec. 9.
•
The Climatic Monitor indicates data of the advancing program.
Manual operation
Manual operation
with time setting
with core temperature
•
There are yellow bars in the input fields indicating the current state of the program.
•
Time: Bar is getting shorter to the left, time is running down.
•
Core temperature: Bar is getting longer to the right until the desired core temperature is reached.
•
Man. Steam: An additional manual humidification is always possible as long the key “Man. Steam” is
pressed.
•
A sound signal announces the end of the program.
Remaining
time
Set time
Set temperature
and humidity
Actual core
temperature
Set core
temperature
Manual
steam
Change
Step
Combi-
cooking
Manual
steam
Change
Step
Combi-
cooking
Menu
back
Save
Next
Step
Preheat
OFF
Menu
back
Save
Next
Step
Preheat
OFF
Menu
back
Save
Next
Step
Preheat
OFF