background image

EN-43

RDV - RGV - RCV 

RBV - RNV - REV

VERTICAL PUMP

ENGLISH

9. 

DISASSEMBLY AND REASSEMBLY

CAUTION! 
The disassembly and reassembly operations must be carried out by qualified and authorised personnel.

CAUTION! 
Carry out the disassembly and reassembly when the pump is off.

Risk

Description and procedural information

Danger of crushing

Danger of crushing during movement of parts.
It is mandatory to wear appropriate PPE.

High-pressure fluid 

injection or ejection hazard

High-pressure fluid injection or ejection hazard during disassembling 
stages.
It is mandatory to wear appropriate PPE.

Danger of burns and 

scalds

Danger of burns and scalds during cleaning and maintenance stages.
Wait for the hot parts to cool down before proceeding.
It is mandatory to wear appropriate PPE.

High voltage/electrocution 

hazard

Electrocution hazard during disassembling stages.
It is forbidden to carry out work on electrical components without first 
swithcing-off the elecrical power supply.
It is mandatory to wear appropriate PPE.

9.1. 

SAFETY INFORMATION FOR DISASSEMBLY AND REASSEMBLY

The following information is to be considered supplementary to the "SAFETY REQUIREMENTS" paragraph.

CAUTION! 
Disconnect the power supply before any installation, maintenance and disassembly, making sure that 
the lifesaving devices are operating correctly.

CAUTION! 
It is necessary that the disassembly and reassembly are carried out by using suitable equipment and in 
rooms suitable for ensuring the maximum safety of the operators.

Summary of Contents for RDV























































Reviews: