Tel: 886.909 602 109 Email: [email protected]
79
Fig.3.92 Parameter setup
User can select the "Restore Default" item to set the parameters to default value. The default value is satisfying
with most measurement.
2
．
Limit
The setup of limit is shown as follow figure.
Fig.3.93 Limit value setting
The function is controlled by a the master switch and respective switch.
The limit of adjacent channel power includes absolute and relatively limits. Absolutely limit is for adjacent
channel power; relatively limit is about adjacent channel power relative to the carrier. When the adjacent channel
power is less than the absolute limit, it is qualified; when the relative value is less than the value of the relative
limit, it is relatively qualified. Qualified, unqualified and did not enable are marked by green, red and white.
Each pair of adjacent-channel limit has four models, absolute, relative, and or.
Please refer to the setup of Fig.3.93. The result is shown as Fig.3.94.
