Tel: 886.909 602 109 Email: [email protected]
61
Fig.3.58 Marker noise on
9) Noise/Hz
Set “Noise/Hz” to “On”, the difference between current amplitude, and the average noise power will display on the
screen.
10) Trace Selection
Pressing "Sel Trace" soft-key, submenu as Fig.3.59 will appear. There are three traces .One of them is not at the
Blank state as it is at activate. Selected trace will choose the marker working trace during these traces which are
activate. The default value is auto, which will choose the first activate traces.
Fig.3.59 Trace selection
2. Peak Operation
Pressing
PEAK
key, the first page of peak menu will appear, and the second page will appear if “NEXT page”
button is pressed.
