Binary Manifold- Port Assignments- High Duty Cycle Hydraulic System
The following port assignment information can be referenced should any plumbing or repair
work need to be performed on the hydraulic system. The port identification is milled into the
manifold adjacent to the respective port.
Bottom of Manifold:
P1
Conveyor Circuit Pressure (From Pump)
P2
Spinner Circuit Pressure (From Pump)
T1
Oil Cool Fan Motor Pressure - see cooler diagram.
T2
Spinner Circuit bypass - see cooler diagram
Side of Manifold:
M1A Conveyor Motor #1 Pressure (bottom port on motor #1)
M1B Conveyor Motor #1 Return (top port on motor #1)
M2A Conveyor Motor #2 Pressure (top port on motor #2 - these ports face the rear of the unit)
M2B Conveyor Motor #2 Return (bottom port on motor #2)
M3A Spinner Circuit Pressure
M3B N/A
Salford BBI Inc.
Page 64
Endurance Operator Manual 2019 V1
07/23/19