IMPORTANT!
On units equipped with tractor-supplied hydraulics
the case drain must be connected to a 0 (zero)
pressure case drain. Gear motor systems require
no pressure case drain.
DO NOT
connect the system unless 0 (zero)
pressure can be verified on the case drain or
damage to the motors will result! Connecting to a
pressurized return will
VOID THE WARRANTY
.
Various tractor manufacturers use different
language for their brand to identify a 0 (zero)
pressure case drain. Please consult your
manufacturer to insure the proper 0 (zero) pressure
case drain is identified.
To maintain maximum operational efficiency, your
tractor needs to have 42 GPM (Gallons Per Minute)
at 2,000 PSI (Pounds per Square Inch) overall for
the tractor-supplied hydraulic system.
Set-up and Preparation- Tractor Supplied Hydraulics
Connection Order
1. Case Drain (Yellow)
2. Spinner Return (Red-Grey) & Conveyor Return (Blue-Grey)
3. Conveyor Pressure (Blue)
4. Spinner Pressure (Red)
NOTE
: Failure to follow proper connection procedures before operation could result in
damaged equipment and
VOID THE WARRANTY
.
Salford BBI Inc.
Page 19
Endurance Operator Manual 2019 V1
07/23/19