Hydraulic Configuration
If your spreader is self-contained, simply connect your PTO shaft which will turn the pump to
make the hydraulic fluid flow. See the appendix for hydraulic plumbing information.
Never attempt to work on or repair this piece of equipment while it is running. The PTO and/or
any other power source must be completely disengaged while working on this unit.
1. Self-contained Hydraulic System
Set-up and Preparation
P360- High Duty Cycle Option
For spreaders powered by the tractor’s hydraulic system, you will need to connect two sets
hoses to the remotes, one set for the conveyor system and one for the spinners. Make sure
that you match and properly connect the pressure and return hoses with each set of remote
ports.
Mismatched hoses or return hoses that are not properly connected will cause damage to
hydraulic components on the spreader.
2. Tractor-supplied Hydraulic System
Standard Hydraulic System
Salford BBI Inc.
Page 18
Endurance Operator Manual 2019 V1
07/23/19