Sakai SW880-1, Shop Manual

Page: 157 / 428

6-030
VIBRATORY DRUM
13) Axle shaft subassembly
13-1) Apply a thin coat of gear oil to the surface of the outer
race of the roller bearing (37) to be press-fitted.
Drive the outer race of the roller bearing (37) into the
housing (15).
Install the oil seal (38).
Apply a thin coat of grease to the lip surface of the oil
seal (38).
13-2) Apply a thin coat of gear oil to the surface of the
vibrator bearing (12) to be press-fitted.
Drive the vibrator bearing (12) into the axle shaft (13).
(NOTICE)
Take care not to damage the bearing when installing
it.
13-3) Lift the axle shaft subassembly with a crane and
reverse it.
Apply a thin coat of gear oil to the surface of the inner
race of the roller bearing (37) to be press-fitted.
Install the inner race of the roller bearing (37).
Axle shaft subassembly : 80 kg (176 lbs.)
•
•
•
•
•
•
•
37
15
38 37
SW800-06073
37
15
38 37
SW800-06073
12
13
SW800-06074
12
13
SW800-06074
37
Axle shaft subassembly
Wooden block
SW800-06075
37
Axle shaft subassembly
Wooden block
SW800-06075