Sakai SW880-1, Shop Manual

Page: 207 / 428

10-023
INSPECTION AND ADJUSTMENT
12-2-2. Adjustment of potentiometer 1 voltage
when forward switch operates
The moment that forward switch turns ON/OFF can be
monitored on water spray indicator lamp in combination
meter. Water spray mode selector switch must be placed in
“AUTO”, and water spray timer switch must be turned OFF
(placed in “ ”).
①
Set starter switch to ON.
②
Move F-R lever (2) in forward direction.
③
Adjust with nut (8) of forward switch (1) so that water
spray indicator lamp in combination meter illuminates
when voltage reaches a value 0.080 V higher than mid-
value measured in 9-2-1.
Example:
Mid-value : 2.500 V
Voltage when forward switch
operates
: 2.500 – 0.080 = 2.420 V
(NOTICE)
Acceptable range for voltage when forward switch
operates is 2.415 to 2.425 V.
Forward switch must be installed with its centerline
aligned with centerline of F-R lever cam.
④
After adjustments are made, make sure about following
points.
F-R lever cam must not push in forward switch until
it bottoms when F-R lever is moved toward forward
position.
F-R lever must automatically return to neutral when
F-R lever is released at a position slightly beyond
forward switch operating point. If lever does not return
automatically, make an adjustment by loosening disc
spring tension adjusting nut (5) and tightening screw
(7). F-R lever operating force must not deviate from
standard value.
•
•
•
•
•
SW880-1-10014
B B
2 1
7
SECTION B-B
N
F
SECTION A-A
A
A
6
5
4
8
Centerlines
must be aligned
SW880-1-10014
B B
2 1
7
SECTION B-B
N
F
SECTION A-A
A
A
6
5
4
8
Centerlines
must be aligned